1050130815 Mantle SH F/M/C for Metso HP200 | Crusher Wear Parts

1050130815 Mantle SH F/M/C for Metso HP200

If you’re running a Metso HP200 cone crusher and need a new mantle, you’ve probably come across part number 1050130815. This is the Short Head mantle available in Fine, Medium, and Coarse cavity profiles — one of the most common wear parts we ship for the HP200 platform.

The mantle is the moving piece. It sits on the head assembly and gyrates against the bowl liner to break rock. On an HP200, the mantle changeout is something your crew probably does every few hundred hours depending on what you’re crushing and how well your feed is sized. The trick is picking the right cavity profile and the right material grade so you’re not swapping mantles every time there’s a full moon.

Part Number & Specifications

Part Number: 1050130815
Compatible Machine: Metso HP200 cone crusher
Part Name: Mantle (moving cone liner)
Cavity Profile: SH — Short Head, available in F (Fine), M (Medium), C (Coarse)
Material Options: Mn13Cr2, Mn18Cr2, or custom alloy on request
Weight: Approximately 180 kg (varies by profile)

The “SH” designation means Short Head configuration, which gives you a steeper toggle angle and a tighter parallel zone compared to standard head setups. This translates to a finer product gradation — useful if you’re producing aggregate for asphalt or making manufactured sand. The F/M/C suffix tells you which cavity profile is cast into this specific mantle. Fine is for small feed and tight CSS, Medium handles the most common secondary crushing work, and Coarse is when your feed is on the larger side.

One thing worth knowing: the HP200 shares the same frame and head assembly geometry as the HP300. The difference is in the motor power and the bore size of the liners. So while 1050130815 is specific to the HP200, the casting process and quality control standards are identical across the HP series.

Application

The HP200 is Metso’s mid-range cone crusher — compact enough for portable plants but tough enough for hard rock. We sell a lot of 1050130815 mantles to operations running HP200s in:

• Aggregate quarries producing base course and chip seal material
• River gravel and basalt processing plants
• Iron ore and manganese ore secondary/tertiary crushing
• Recycled concrete and demolition waste processing
• Limestone and dolomite production for road construction

The SH cavity profile is especially common in tertiary crushing stages where the goal is to produce a well-shaped final product. If you’re running an HP200 in a closed circuit with a three-deck screen, chances are you want an SH mantle in the Medium profile as your go-to setup.

We’ve supplied these mantles to customers across Australia (particularly Queensland and Western Australia), Chile, South Africa, and Southeast Asia. The feedback is consistent — when you match the cavity profile to your actual feed size instead of just ordering whatever was on the last PO, mantle life goes up noticeably.

Material & Features

We cast in three standard manganese steel grades:

• Mn13Cr2 (13% manganese, 2% chromium): The default choice for most applications. Good work-hardening characteristics, reasonable cost, and handles anything from limestone to medium-hard granite without complaint.
• Mn18Cr2 (18% manganese, 2% chromium): For harder, more abrasive rock. The extra manganese gives deeper work-hardening under impact, which means the surface gets harder as it works. We had a customer in Western Australia running HP200s on basalt — they switched from Mn13 to Mn18Cr2 and got roughly 35% longer mantle life. On hard rock, that difference adds up fast.
• Custom alloys: If you’re dealing with something unusual — highly abrasive material, extreme temperatures, or a specific wear pattern that standard manganese isn’t solving — we can develop a tailored alloy. It takes a bit of lead time but the payoff can be significant.

All our mantles are cast in resin sand molds with CNC-machined mating surfaces. The dimensional accuracy is held to OEM spec — we check every batch with CMM equipment. The part you get should drop onto your head assembly without any filing or forcing. If it doesn’t fit right, that’s on us, not you.

Why Choose Us

We’ve been casting crusher wear parts for over 40 years. Not reselling. Not brokering. We melt the steel, pour the castings, machine the critical surfaces, and ship. Our HP200 mantle tooling was developed from original Metso dimensions and verified on multiple customer machines.

A few things that set us apart:

• Stock availability: We keep HP200 mantles in all three cavity profiles (F, M, C) in regular production. Typical lead time is 3-4 weeks for standard orders.
• Small orders welcome: Some foundries won’t bother with less than a container load. We’ll ship 2 mantles if that’s what you need.
• Full HP range: Beyond the HP200, we also stock mantle and bowl liner sets for HP100, HP300, HP400, HP500, and HP800. If you’re running multiple Metso models, we can be your single source.

We’re not the cheapest option on Alibaba. What we are is reliable — consistent quality, accurate dimensions, and we actually pick up the phone when you call with a technical question.

Still Not Sure Which Profile You Need?

It happens more often than you’d think. A customer calls about a mantle, and after asking a few questions about feed size, CSS setting, and product spec, we realize they’ve been running the wrong cavity profile for years. No shame in it — the profile designations aren’t exactly intuitive.

If you want a second opinion on whether Fine, Medium, or Coarse is right for your HP200 setup, drop us a line with your typical feed gradation and target product size. We’ve probably seen your exact situation before — and if you’re not sure about the part number either, just send a photo of your current mantle and we’ll identify it. Check out our HP100 mantle range if you’re running that model as well.